If you need a photo that is not on the site, just ask.
There's nothing here!
Log in to check out faster.
Tax and shipping calculated at checkout.
Reproduction Toilet Tank Lids take about a week to manufacture prior to shipment. During checkout, the shipping method you select will be used after the item has been made and is ready to ship.
Manufacturer: GERBER Part Number: 28-994 Lid Size: 18.75" x 11" Tank P/N: MX-28-994 14" Rough In 1.6 GPF version Tank Size: 18" x 10.5"
Note: this toilet was also made as a 1.28 GPF with the same part number stamped inside the tank. This lid will only fit the 1.6 GPF version.
This is a reproduction toilet tank lid.These lids are custom designed with sophisticated 3D modeling software and manufactured in North Carolina. It is available as a beautiful sapele wood tank top simply coated with marine grade spar urethane to provide moisture resistance and also available to match any toilet manufacturers original color. The wood lid is glazed with an enamel epoxy coating so that it matches the color of your existing toilet. In most cases we already have the resin on the shelf in the color you need, but in some cases the color has to be ordered. The wood is primed to accept the finish and the finish is designed to last essentially forever. It hardens to a consistency similar to automotive paint and is chemical resistant so you can clean it with normal household cleaners.The lid is designed to accommodate tank internal parts that stick up as much as 0.2" above the height of the top of the tank. If you have a fill valve that sticks up above the tank more than that height, you can possibly replace your fill valve with a Fluidmaster 400A fill valve, or we may need to custom design a lid to accommodate your internal parts. Please contact us if this internal clearance will be an issue.In addition to offering any tank lid we've identified in these reproduction listings, we can custom manufacture ANY toilet tank top. This means if you need a lid for a tank that we've never seen before, we can still supply it. Simply take a piece of cardboard and place it on top of the tank, and as accurately as possible trace the outside of the tank. Mail us that tracing and we will be able to manufacture the lid for you.The lead time for these lids is typically 1 week to allow time for manufacturing, sanding, filling, priming, glazing, and curing. However, if we have to order the color you need we will notify you and that will typically add one week to the lead time.
© 2023 Cheap Toilet Tank Lids. Powered by Shopify.